Starlight Xpress Pricelist

Starlight Xpress






Starlight Xpress
HOME PAGE

TELESCOPES
& ASTRONOMY



Starlight Xpress Astronomical Imaging Equipment from Telescopes and Astronomy. Please email or call for information, pricing confirmations and shipping prices.

Starlight Xpress
INDEX

STARLIGHT XPRESS WEB SITE

"WHAT'S NEW?"

Starlight Express SXCCD Starlight Xpress Starlight SXCCD Starlight-Xpress

ORDERING
INFORMATION

OTHER PRICE LISTS

UPDATED 19th April 2013


TELESCOPE GLOSSARY

MICROSCOPE GLOSSARY
HIGH END ASTRONOMY IMAGING CAMERAS, CAMERA FILTER WHEELS, USB INTERFACE, AUTOGUIDERS, ACCESSORIES

STARLIGHT XPRESS NEWS!
PLEASE CONTACT US TO CONFIRM PRICES DUE TO EXCHANGE RATE FLUCTUATIONS ETC.

 Losmandy GM-8 AND G-11 mount no-tools tripod and elevation lock knobs 

 These replace factory Allen bolts so the mount can be set up and adjusted without tools. Our tripod bolts mount the GM-8 and G-11 equatorial head to the Losmandy tripod top piece. Our elevation lock bolts and washers secure the elevation adjustment on the GM-8 and G-11. Bolts are stainless steel, and each has a plastic Tee handle that is 1-3/4 inch in diameter to provide adequate holding power when hand tightened.


 Meade Lightbridge 8”, 10”, 12”, and 16” primary and secondary collimation knobs 
These replace factory screws so that collimation of both primary and secondary mirrors can take place without tools. We also offer stronger primary mirror support springs for the Lightbridge that will not sag like the factory springs. 


BOB'S KNOBS SPECIALS
http://www.bobsknobs.com/
    Meade LightBridge 12" Primary $58AUD
    Meade Light Bridge 8", 10", 12" Primary Springs $34AUD
    Meade 8" F/10 with 6 Secondary Screws $$34AUD
    Meade 10" F/10 with 6 Secondary Screws $34AUD
    Celestron 8" Standard - All SCT except with Black Collimation Screws $34AUD
    Celestron 9.25" Standard - All except CPC 925 $34AUD
    Celestron 11" - All except CPC 1100 $34AUD
    Celestron 8" Metric - SCT with Black Phillips Collimation Screws $38AUD


2/12
1
Bob’s Knobs™
TELESCOPE COLLIMATION THUMBSCREWS
6976 Kempton Rd., Centerville IN 47330 USA
www.bobsknobs.com bob@bobsknobs.com
DEALER INFORMATION
We package knobs and instructions for dealer display in a plastic pouch for hanging. Prices listed
below include worldwide shipping, when ordered in quantities of 10 sets or more shipped to one
address. Each telescope requires a different knob design. You can mix any of our products to
meet the 10-set minimum. See our website for all products, along with photographs and knob
construction materials. Prices are in U.S. dollars. All specifications are subject to change.
Orders from U.S. dealers: We ship within one business day upon receipt of a purchase order,
which can be emailed to bob@bobsknobs.com or faxed to 765-855-5109. Payment is net 30 days.
Orders from dealers outside the U.S.: Pre-payment is required, which can be made to
sales@bobsknobs.com through www.paypal.com using your credit card. We ship within one
business day upon receipt of payment. Instructions are available in English, French, German,
Italian, Japanese, or Spanish.
CELESTRON COLLIMATION KNOBS
PART
NUMBER
APPLICATION DEALER
PRICE
NOTES
C5std SCT 5” f/10 standard 12 Silver collimation screws
C5met SCT 5” f/10 metric 15 Black Phillips collimation screws
C6 SCT 6” f/10 15
C8org SCT 8” orange 15 Pre-1980 orange tube
C8std SCT 8” f/10 standard 12 Most with silver collimation screws
C8met SCT 8” f/10 metric 15 Most with black Phillips collimation
screws (CPC 800)
C8edg SCT 8” EdgeHD 15 EdgeHD optics
C8hyp SCT 8” Hyperstar 15 Hyperstar secondary
C9.25std SCT 9.25” f/10 standard 12 Scopes with silver collimation screws
C9.25met SCT 9.25” f/10 metric 15 Most with black Phillips collimation
screws (CPC 925)
C9.25fst SCT 9.25” Fastar 15 Also fits 9.25” with EdgeHD optics
C11std SCT 11” f/10 standard 12 Silver collimation screws and flat
secondary housing
C11met SCT 11” f/10 metric 15 Most with black Phillips collimation
screws (not for Fastar)
C11stdfst SCT 11” f/10 std Fastar 12 Fastar option, silver screws
C11metfst SCT 11” f/10 met Fastar 15 Fastar option, black Phillips screws
C14set SCT 14” f/11 set screw 15 Factory headless collimation screws
C14stdphi SCT 14” f/11 standard 12 Silver Phillips (standard thread)
C14metphi SCT 14” f/11 metric 15 Black Phillips (metric thread)
2/12
2
MEADE COLLIMATION KNOBS
PART
NUMBER
APPLICATION DEALER
PRICE
NOTES
M6-6 SCT 6” f/10 6-screw 18 Six secondary screws
M8-3 SCT 8” f/10 3-screw 12 Three secondary screws; includes
dust cover spacers
M8-4 SCT 8” f/10 4-screw 12 Four secondary screws (fourth
screw is on the side)
M8-6 SCT 8” f/10 6-screw 12 Six secondary screws
M8wf SCT 8” widefield f/6.3 18 Includes dust cover spacers
M10-3 SCT 10” f/10 3-screw 12 Three secondary screws
M10-6 SCT 10” f/10 6-screw 12 Six secondary screws
M10wf SCT 10” widefield f/6.3 18 Includes dust cover spacers
M12-3 SCT 12” 3- and 4-screw 12 Three or four secondary screws
M14-6e SCT 14” 6-screw exposed 12 Six secondary screws and exposed
collimation screws
M16-3 SCT 16” 3-screw 18 Three secondary screws
M16-6 SCT 16” 6-screw 18 Six secondary screws
MLB8pri Lightbridge 8” primary 20 Adjustment and lock screws
MLB10pri Lightbridge 10” primary 20 Adjustment and lock screws
MLB12pri Lightbridge 12” primary 20 Adjustment and lock screws
MLB12az1 Lightbridge 12” lowprofile
azimuth lock (5/16) 6 Rocker box with 5/16” diameter
azimuth lock screw
MLB12az2 Lightbridge 12” lowprofile
azimuth lock (3/8) 6 Rocker box with 3/8” diameter
azimuth lock screw
CNsec35 Lightbridge secondary 15 Fits 8”, 10”, 12”, 16”
MLBspr Lightbridge springs 12 Stronger springs for 8”, 10”, 12”
primary mirror support
MSF10pri Starfinder 10” primary 20
MSN6sec SNT 6” secondary 15
MSN8sec SNT 8” secondary 15
MSN10sec SNT 10” secondary 15
FPI COLLIMATION KNOBS
PART
NUMBER
APPLICATION DEALER
PRICE
NOTES
FPIsec FPI Protostar secondary 18 Replaces 8-32x1” screw
STARMASTER (ASTROSYSTEMS) COLLIMATION KNOBS
PART
NUMBER
APPLICATION DEALER
PRICE
NOTES
SMsec Starmaster 12.5” & 14.5” 18 Four knobs
2/12
3
TAKAHASHI COLLIMATION KNOBS
PART
NUMBER
APPLICATION DEALER
PRICE
NOTES
TSC225 TSC-225 SCT 15
Mew180 Mewlon 180 secondary 15
Mew210 Mewlon 210 secondary 15
Mew300 Mewlon 300 secondary 18
INTES COLLIMATION KNOBS
PART
NUMBER
APPLICATION DEALER
PRICE
NOTES
MK67 MK65, MK66, MK67
secondary 15 Also fits Orion (US) Argonaut 150
INTES-MICRO ALTER COLLIMATION KNOBS
PART
NUMBER
APPLICATION DEALER
PRICE
NOTES
M500 M500 secondary 15
M703 M703 secondary 15
ORION (US) COLLIMATION KNOBS
PART
NUMBER
APPLICATION PRICE
IN US$
NOTES
CNsec25 XT secondary Phillips 15 XT series with 20mm Phillips screws
CNsec30 Secondary set screw
(very common) 15 XT, XX, AstroView, SkyView,
StarBlast, etc. with set screws
CNsec35 Astrograph 15
MK67 Argonaut 150 15 By Intes
SCT by Celestron See our Celestron listings
ORION OPTICS (UK) COLLIMATION KNOBS
PART
NUMBER
APPLICATION PRICE
IN US$
NOTES
CNsec35 OD-series secondary 15 Fits Orion Optics OD-series
Newtonian secondaries
SKYWATCHER COLLIMATION KNOBS
PART
NUMBER
APPLICATION DEALER
PRICE
NOTES
SWpri 5” to 10” Newt primary 18 Collimation and lock knobs
CNsec30 5” to 12” Newt sec 15 Secondary with set screws
MN190pri MN190 primary 18 Collimation and lock knobs
MN190sec MN190 secondary 15
2/12
4
VIXEN COLLIMATION KNOBS
PART
NUMBER
APPLICATION DEALER
PRICE
NOTES
VC200sec VC200L secondary 15
VMC200sec VMC200L secondary 15
VMC260sec VMC260L secondary 15
R200pri R200SS primary 18 Collimation and lock knobs
R200sec R200SS secondary 18
ASTRO-TECH COLLIMATION KNOBS
PART
NUMBER
APPLICATION DEALER
PRICE
NOTES
AT8RC AT6RC, AT8RC sec 18 Ritchey Crιtien
AT10RC AT10RC secondary 18 Ritchey Crιtien
AT12RC AT12RC secondary 18 Ritchey Crιtien
CNsec35 All ATIN Newt sec 15 Imaging Newtonian
LOSMANDY MOUNT KNOBS
PART
NUMBER
APPLICATION DEALER
PRICE
NOTES
LGtri GM-8, G-11 tripod 20 Mounts equatorial head to tripod
LGele GM-8, G-11 elevation
lock 15 Locks equatorial head elevation
setting (contains two knobs)
CELESTRON MOUNT KNOBS
PART
NUMBER
APPLICATION DEALER
PRICE
NOTES
Ntri NexStar tripod bolts 20 Attaches tripod to scope base (az-el
mount with non-captive bolts only)
CGEstd Standard CGE mount kit
(not for CGE Pro) 30
Attaches both tripod and equatorial
mount to electronics pier; includes
counterweight bar stop screw
Note: We are constantly adding knobs to our product line. Please see www.bobsknobs.com for
the latest information. Also, please contact us (bob@bobsknobs.com) if you need us to design
knobs for a telescope that is not listed.


NEW STARLIGHT XPRESS CAMERAS

SXVR-H814 MEDIUM FORMAT COOLED CCD CAMERAS - 9.2 MILLION PIXELS!
It doesn’t have to be big to be brilliant, but it certainly does require innovation, excellent electronics and huge amounts of experience to get such an amazing 
camera in such a small package.

The SXVR-H814 uses the very latest and certainly the best CCD to be released by Sony since we started designing and producing cameras around Sony 
CCDs in 1991. It has a remarkable Quantum Efficiency of 77% which was previously unheard of in an interline sensor; but with all of the wonderful benefits 
of an interline CCD, especially from Sony such as incredibly low thermal noise and very fast electronic shutter (no need for mechanical shutters).

Key Points:
• Exceptionally High QE
• Incredibly low noise (thermal and readout)
• Compact and light-weight
• Remarkably Low Power consumption
• Outstanding build quality
• Fast downloads
Colour or Monochrome - $4160AUD
Send us an email for an information PDF.


OCULUS - 180° ALL SKY CAMERA!
Oculus is the latest introduction to the innovative portfolio of Starlight Xpress products. The Oculus uses a SuperHAD CCD from Sony which has all of the 
wonderful benefits of an interline Sony CCD, such as incredibly low thermal noise and very fast electronic shutter (no need for mechanical shutters). With 
exceedingly low noise electronics and a fast F/2 180 degree fisheye lens, capturing the night sky is an absolute dream.

The Oculus is USB powered and driven but does require a 12DC input to drive the built in anti-dew heaters. The software supplied allows you to capture a 
series of exposures and add them together to create a dramatic AVI movie of the night sky.

This is the perfect camera for imaging meteor showers, viewing the weather conditions at a remote observatory and imaging the night sky in a spectacular way.

Key Points:
• Extremely low noise (thermal and readout)
• Compact and light-weight
• Remarkably Low Power consumption
• Outstanding build quality
Colour or Monochrome - $1365AUD
Send us an email for an information PDF.


Starlight Xpress SXV Camera Pricelist
SXVF-M5 SXVF-M5 USB 2.0 CCD Camera System (Mono - 16bit) $1156AUD SXVF-M5C SXVF-M5C USB 2.0 CCD Camera System (Colour - 16bit) $1156AUD SXVF-H5 SXVF-H5 USB 2.0 CCD Camera System (Mono - 16bit) $1311AUD SXVF-M7C SXVF-M7C USB 2.0 CCD Camera System (Colour - 16bit) $1467AUD SXVF-M7 SXVF-M7 USB 2.0 CCD Camera System (Mono - 16bit) $1467AUD SXVF-M8C SXVF-M8C USB 2.0 CCD Camera System (Colour) $1947AUD SXVF-M9 SXVF-M9 USB 2.0 CCD Camera System (Mono) $2255AUD SXVR-H9 SXVR-H9 USB 2.0 CCD Camera System (Mono) $2475AUD SXVR-H9C SXVR-H9C USB 2.0 CCD Camera System (Colour) $2475AUD SXVR-H16 SXVR-H16 USB 2.0 CCD Camera System (Mono) $3834AUD SXVR-H18 SXVR-H18 USB 2.0 CCD Camera System (Mono) $2838AUD SXVR-H18-FW-OAG SXVR-H18 USB 2.0 CCD Camera System with 2" Filter Wheel and OAG $3267AUD SXVR-M25C SXVR-M25C USB 2.0 CCD Camera System (Colour) $3729AUD SXVR-M26C SXVR-M26C USB 2.0 CCD Camera System (Colour) $3729AUD SXVR-H35 SXVR-H35 USB 2.0 CCD Camera System (Mono) $5819AUD SXVR-H36 SXVR-H36 USB 2.0 CCD Camera System (Mono) $6858AUD Lodestar Lodestar (Stand-alone) Autoguider $677AUD Colour Lodestar Colour Lodestar (Stand-alone) Autoguider $677AUD SXV-Autoguider SXV Autoguider (1/3" Format CCD) $495AUD CoStar CMOS (Stand-alone) Autoguider $462AUD SXV-EX AutoguiderSXV EX Autoguider (1/2" Format CCD) $578AUD SXV Filter Wheel Pricelist
SXUFW-1T USB Filter wheel with internal 7 position 1.25" Filter holder. Connections T-Thread female i/p & male o/p. $523AUD SXUFW-1S USB Filter wheel with internal 7 position 1.25" Filter holder. Connections SCT female i/p & T male o/p. $545AUD SXUFW-2T USB Filter Wheel with 5 position 2" filter holder. Connections T-Thread female i/p & male o/p. $523AUD SXUFW-2S USB Filter Wheel with 5 position 2" filter holder. Connections SCT female i/p & T male o/p. $545AUD SXUFW-2SS USB Filter Wheel with 5 position 2" filter holder. Connections SCT female i/p & S male o/p. $564AUD SXUFW-2TAK USB Filter Wheel with 5 position 2" filter holder. Connections 72mm male i/p & T-thread male o/p. $593AUD SXUFW-2TAK-TAK USB Filter Wheel with 5 position 2" filter holder. Connections 72mm male i/p & 72mm male o/p. $621AUD SXUFW-UM36T USB Filter Wheel with 7 position 36mm unmounted filter holder. Connections T-Thread female i/p & male o/p. $523AUD SXUFW-UM36S USB Filter Wheel with 7 position 36mm unmounted filter holder. Connections SCT female i/p & T male o/p. $545AUD SXUFW-UM36TAK USB Filter Wheel with 7 position 36mm unmounted filter holder. Connections 72mm male i/p & T-thread male o/p. $593AUD SXUFW-UM36TAK-TAK USB Filter Wheel with 7 position 36mm unmounted filter holder. Connections 72mm male i/p & 72mm male o/p. $863AUD SXUFW-UM50TAK USB Filter Wheel with 5 position 50mm unmounted filter holder. Connections SCT female i/p & 72mm TAK male o/p. $578AUD SXUFW-UM50S USB Filter Wheel with 5 position 50mm unmounted filter holder. Connections SCT female i/p & T male o/p. $545AUD SXUFW-UM50.8TAK USB Filter Wheel with 5 position 50.8mm unmounted filter holder. Connections SCT female i/p & 72mm TAK male o/p. $578AUD SXUFW-UM50.8S USB Filter Wheel with 5 position 50mm unmounted filter holder. Connections SCT female i/p & T male o/p. $545AUD 1.25" Filter Plate SXV FW 7 position 1.25" filter carousel $85AUD 2" Filter Plate SXV FW 5 Position 2" Filter carousel $85AUD 36mm UM Filter Plate SXV FW 7 Position 36mm Unmounted Filter Carousel $85AUD 50mm UM Filter Plate SXV FW 5 Position 50mm Unmounted Filter Carousel $85AUD SXVR-FW-Backplate SXVR dedicated Filterwheel backplate allowing connection of the SXVR-H18 to the SXV Filterwheel without adaptors. $75AUD Female T Adaptor Female T Thread Adaptor for SXV Filter Wheel $58AUD Male T Adaptor Male T Thread Adaptor for SXV Filter Wheel $58AUD Female SCT Adaptor Female SCT Adaptor for SXV Filter Wheel $75AUD Male SCT Adaptor Male SCT Adaptor for SXV Filter Wheel $75AUD Male 72mm TAK Adaptor Male 72mm TAK Adaptor for SXV Filter Wheel $85AUD Female 52mm Adaptor Female 52mm Adaptor for SXV Filter Wheel $75AUD Male 52mm Adaptor Male 52mm Adaptor for SXV Filter Wheel $75AUD Female 54mm Adaptor Female 54mm Adaptor for SXV Filter Wheel $75AUD Male 54mm Adaptor Male 54mm Adaptor for SXV Filter Wheel $75AUD Female Tak Adaptor Female Tak Adaptor for SXV Filter Wheel $85AUD FW-Hand Controller Hand Controller for the SXV Filter Wheel $138AUD SXV Accessory Pricelist
SXV-SI SXVF Serial Interface Box $148AUD STAR2000-SS SkySensor2000 Adaptor for STAR2000 $39AUD STAR2000-RB STAR2000 Relay Box $85AUD 26mm-ET 26mm Extension Tube (M42 Pentax Thread - M42 x 1mm Pitch) $75AUD T-26mm-ET 26mm Extension Tube (T-Thread - M42 x 0.75mm pitch) $75AUD PSU-3 Power Supply for MX/SXV/SXVF Camera (Please specify specific camera.) $127AUD SX-SLFW-OAG Ultra-slimline off Axis Guider Assembly for use with the SX Filter wheel & Lodestar/SXV/SXV-EX Autoguider. $286AUD SX-UOAG Ultra-slimline off Axis Guider Assembly with Extension Tube. $308AUD SXVR-OAG Slimline off Axis Guider for direct coupling to SXVR Cameras. $386AUD AO/OAG Extension Tube AO/AOG AutoGuider Extension Tube $75AUD OAGEXSHORT 12mm OAG Extension Tube for use with SXV OAG & SXVR-H18 Camera $88AUD OAGEXLONG 20mm OAG Extension Tube for use with SXV OAG & SXVR-H18 Camera $102AUD Lodestar Cable Guider cable for the SXV Lodestar $40AUD Cooling Enhancer Additional Fan Bracket for SXVR range of Cameras $85AUD SXV-AO-LF Large Format Active Optics Guiding System $1855AUD SXV-AOQSI Large Format Active Optics Guiding System without OAG (QSI compatiable) $1540AUD

ALL ABOUT
TELESCOPES

Starlight Express
HOME PAGE
Starlight Xpress
INDEX
Starlight Xpress
Contact Us - telescopes@adam.com.au
STARLIGHT XPRESS WEB SITE
SITE MAP & SEARCH SITE
Starlight Xpress SXCCD Filter Wheels







Solar

Starlight Xpress AutoGuiders Starlight Xpress Starlight Express Filter Wheels Meade 127mm APO










































Page 166